Service HotlineThe positioning pin is a pin designed to accurately position the two adjacent parts of the mold in a mold composed of two or more parts. It can be seen that the positioning pin plays a positioning role, and the mold must be accurately synchronized when it is closed. product, and the positioning pin can make the upper and lower molds play a role in accurate positioning. In the mold design and manufacture of Yueluo, the positioning pin is one of the most common parts. Since it is only used for positioning between parts, few people will pay too much attention to it. In the cold stamping process of Yueluo, the dimensional accuracy of the blanking parts depends on the size of the working part of the punch and the concave die, and the dimensional difference between them constitutes the blanking die gap. Gap is an important process parameter for die design, and its size has a great influence on the quality of the section of the blanking part, the blanking force, and the life of the die. If the gap is too large, punching burrs will appear in punching; if the gap is too small, secondary cracks will occur in the section and extrusion burrs will appear, which will make the quality of the section after punching unsatisfactory, and a reasonable gap will not only help the punching section. The improvement of quality also contributes to the improvement of the lifespan of the 9 bottles.
Iron two AdelaideAdelaideAdelaidecombination screws can be sucked up with magnets, but stainless steel two AdelaideAdelaideAdelaidecombination screws are difficult to be sucked up. Environmentally friendly three-AdelaideAdelaideAdelaidecombination screws and non-environmentally friendly ones are invisible to the naked eye and require mechanical testing. It cannot be judged with the naked eye and out of thin air. The specifications of the two AdelaideAdelaideAdelaidecombination screws need to be determined by the national standard. The salt spray of the two AdelaideAdelaideAdelaidecombination screws needs to be measured with a salt spray machine for how many hours.
The AdelaideAdelaideAdelaidecombination screw is actually a kind of screw, but it is special. It is generally a three-component or a two-component, but at least it can be called a AdelaideAdelaideAdelaidecombination screw. The main difference from ordinary screws is that they are equipped with one more AdelaideAdelaidespring washer or one more flat washer than ordinary screws. This is the main difference between the appearance of AdelaideAdelaideAdelaidecombination screws and ordinary screws. In addition to the obvious difference in appearance between AdelaideAdelaideAdelaidecombination screws and ordinary screws, the main difference is the difference in mechanical properties and uses. The AdelaideAdelaideAdelaidecombination screw is a three-component or two-component with a flat washer. Of course, it is equipped with a flat washer by an ordinary screw. When the spring flat pad is attached, the spring flat pad will not fall off. Fastened to form an assembly. In terms of mechanical performance, the AdelaideAdelaideAdelaidecombination screw is composed of three accessories, and in terms of performance, three fasteners must be used together. The mechanical properties of the combined screw are stronger when used. More convenient, the biggest advantage of the combined screw is that the production line can be operated conveniently and quickly, and the work efficiency can be improved. The difference between the use of AdelaideAdelaideAdelaidecombination screws and ordinary screws is mainly in the breadth of use. The use of ordinary screws is more extensive than that of AdelaideAdelaideAdelaidecombination screws. Basically, ordinary screws are used in industrial products, and AdelaideAdelaideAdelaidecombination screws! It is only useful for specific product materials. When the screw needs to be used with a AdelaideAdelaidespring washer and a flat washer, the AdelaideAdelaideAdelaidecombination screw can be used at this time.
AdelaideCylindrical pins are generally used to connect, lock parts or for assembly positioning, and can also be used as parts of safety devices. The cylindrical pin is fixed in the pin hole by interference fit with the pin hole to fix parts, transmit power, or act as a positioning member. The prior art cylindrical pin press-fitting is shown in Figure 1. This kind of cylindrical pin prevents the cylindrical pin body from withdrawing through the locking force and axial friction force brought by the interference fit between the cylindrical pin body and the pin hole. However, the interference of the cylindrical pin body will gradually decrease during use, so that the firmness of the connection and the positioning accuracy will gradually decrease. Therefore, the cylindrical pin can be easily withdrawn during use, resulting in potential safety hazards.
In order to solve the problem of nut loosening, various self-locking nuts have appeared, which have complex structure, high production cost, inconvenient installation and unsatisfactory anti-loosening effect. At present, the never-loosening nuts produced in Japan are mostly used, mainly in the form of double nuts. Each nut is provided with an eccentric cam protrusion, and each nut is provided with a groove and an inclined plane to squeeze the cam protrusion of each nut. When pressing, the cam protrusion of the nut will move to a small radius along the slope of the nut, so that the nut will not loosen, but whether it is a nut or a nut, it is always under the action of eccentric force. In addition, various non-loose nuts designed by many manufacturers are to increase the friction between the nut and the fastening workpiece or increase the barb to achieve the purpose of never loosening, but the effect is not ideal.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: hollow nylon circular isolation column, cup head gasket, non-standard bolts, six-star plum Adelaidehandle nuts and other products, we can provide you with suitable products for you fastener solutions.
