Service HotlineNuts and washers are both small and medium-sized components of the tension reinforcement system, and they are easily lost on the construction site when used separately, which is not conducive to the storage management of turnover materials; 3) During the process of formwork support and removal, they must be installed individually And demolition, thus adding a construction process, affecting the efficiency of construction.
According to the process, the BirminghamBirminghamwing nut can be divided into cold heading BirminghamBirminghamwing nut, casting BirminghamBirminghamwing nut and stamping BirminghamBirminghamwing nut. According to the shape, it can be divided into two basic shapes: square wing and round wing. According to the national standard number, it can be divided into GB/T62.2-2004 Square Wing Wing Nut Wing Nut Round Wing Wing Nut Round Wing GB/T62.1-2004 Round Wing Wing Nut
In general, the electroplating of BirminghamBirminghamBirminghamcombination screws generally refers to the de-plating of iron BirminghamBirminghamBirminghamcombination screws. Electroplating is divided into environmental protection and non-environmental protection. Commonly used BirminghamBirminghamBirminghamcombination screw electroplating colors include green color zinc, green blue zinc, green white zinc, green nickel, red color, white zinc, white nickel, etc. Cross recessed BirminghamBirminghamBirminghamcombination screws, hexagonal combination bolts and self-tapping BirminghamBirminghamBirminghamcombination screws are used in the same way as the corresponding cross recessed screws, hexagon head bolts and self-tapping screws. The main feature of these BirminghamBirminghamBirminghamcombination screws is that they are equipped with corresponding washers, which are very convenient to use.
In general, the size, mechanical properties and working performance requirements of self-tapping screws have the following standards: 1. BirminghamSelf-tapping screw size standard ASME B18.6.3 2010 standard not only introduces the dimensions of slotted and cross-recessed self-tapping screws and metal drive screws, but also includes the mechanical properties and work performance requirements of carbon steel self-tapping screws. The appendix gives instructions for measuring the various dimensions and application guidance on clamping lengths and test apertures. 2. BirminghamSelf-tapping screw performance standards (including mechanical properties and work performance): (1) SAE J933: Introduces the mechanical performance and work performance requirements of carbon steel ordinary self-tapping screws and white-cut self-tapping screws. The requirements for selection of raw materials, heat treatment, depth of carburized layer, surface hardness, and core hardness are further specified. (2) SAE J81: The mechanical properties and working performance of self-extrusion self-tapping screws (self-tapping locking screws) are introduced. (3) SAE J78: The mechanical properties and working properties of self-drilling and self-tapping screws are introduced. (4) IFl-113: The mechanical properties and working properties of self-drilling and self-tapping screws are introduced. (5) ASTM C1513: Introduces the mechanical properties and performance requirements of carbon steel self-tapping screws. For other special types of self-tapping screws, there is no corresponding national or industrial standard, and no data for self-tapping screws made of other metal materials other than carbon steel have been recognized. For technical data on these self-tapping screws, you can check with the manufacturer.
The surfaces of the existing door panels are spliced together by fasteners such as nails and bolts. For example, a door body structure for a production line disclosed in CN203807555 is used for the doors of each chamber of the coating production line. The size of the mechanism is the same, and the left and right sides of the door body can be freely opened and closed; the chamber door and the door frame are detachably connected by multiple sets of sealing components, and the sealing components include hinge devices and locking parts.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: TA2 titanium washers, threaded screws, cylinder head bolts, male high-strength screws and other products, we can provide you with suitable fastener solutions for you .
