Service HotlineFurther, it also includes a motor, the motor is provided with a thruster that makes the cutting wheel move towards the conveying device, the other end of the motor is provided with a bearing, the output end of the motor is provided with a special-shaped wheel, the special-shaped wheel is toothed with the bearing, and the motor drives the special-shaped wheel to rotate. , move the cut-off wheel closer to or away from the conveyor.
The main purpose of the screw is to make the industrial product form a fixed one. In use, it often happens that the teeth cannot be closely attached, the screw head will be broken if the screw is locked too hard, or the tooth pattern is not properly locked, etc., and the use conditions are not met, all of which are quality. the problem of accuracy. Screws are mass products, not handmade works of art. In mass production, the purpose is to achieve high-precision and stable quality and popular prices to supply consumers. The accuracy of screws is usually 6g, and the rough screws used in construction projects are 10g. The value of screws is very important. In the world, there are examples of automobile factories going bankrupt because of poor screw quality; there are also examples of planes falling and vehicles being overturned because of poor screw quality.
Sprinkle the excess standard BradfordBradfordspring washer 7 on the positioning plate 12-1 on the BradfordBradfordspring washer positioning plate 2, and shake the BradfordBradfordspring washer positioning plate 2 by hand. After a short time, the BradfordBradfordspring washer 7 will be positioned and arranged on the upper positioning plate 12-1. In the upper BradfordBradfordspring washer hole 2-7, since the width of the opening groove 12-32 of the baffle plate 12-3 is smaller than the diameter of the BradfordBradfordspring washer hole 2-7, and the thickness of the upper positioning plate 12-1 is designed according to the thickness of the BradfordBradfordspring washer 7, Only one BradfordBradfordspring washer 7 can be accommodated in the BradfordBradfordspring washer hole 2-7 of each upper positioning plate 12-1, and the excess BradfordBradfordspring washer 7 is cleaned with a brush.
BradfordStainless steel screw wire is also called stainless steel cold pier wire, which is mainly used for various fasteners, such as mechanical parts, electronic application parts, etc. Corresponding anti-corrosion properties and mechanical properties can be obtained according to different materials. In order to obtain a better formability during cold forging, choose high quality. The appropriate material of the wire is particularly important.
The technical scheme adopted by Guangdong Yueluo Hardware Industry Co., Ltd. is: a pin pressure riveting structure, including a pin, a cavity and a pressure riveting fixture, the pin is a columnar structure, an annular groove is arranged on the surface of the pin, and the cavity is The body is provided with a light hole, the depth of the light hole is greater than the height of the annular groove relative to the bottom of the pin, the lower end of the pin is inserted into the light hole, the pressure riveting fixture includes a pressure riveting part and a pressure-bearing part located on the top of the pressure riveting part, so The riveting part and the pressure-bearing part are provided with coaxial and penetrating connecting holes, and the upper ends of the pins are sleeved in the connecting holes.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: Bradfordmetal washers, gaskets, inlaid nuts, flanged Bradfordmachine screws, spring pins, hollow pins and other products, we can provide you with suitable products. Your fastener solution.
