Service HotlineYueluo provides a thin-plate rivet method, which includes the following steps: providing a metal thin plate, a rivet and a thin-plate rivet fixture, the outer edge of the rivet is provided with an engaging structure, and the thin-plate rivet fixture includes a rivet head and a thin plate rivet fixture. The riveting head has a convex rib on the surface of the rivet head; a riveting hole is formed in the thin metal; The two sides of the metal sheet are extruded so that the protruding ribs are embedded in the metal sheet, so that the metal sheet is deformed, and the inner edge of the rivet hole shrinks inward to fix the occlusal structure.
GalwayGalwayhand screw is a screw with a plastic head, and the user fixes the GalwayGalwayhand screw by turning the plastic head by hand. At present, a hand-tight screw is disclosed in the market publication number CN202203253U, which includes a plastic head and a screw rod, the plastic head and the screw rod are connected together, and the height of the plastic head is higher than that of ordinary screws, and the height is 9cm. The screw of the GalwayGalwayhand screw is fixed in the plastic head by glue. After a period of use, the aging of the glue leads to the loosening of the screw and the plastic head. When the plastic head is stressed, the screw rod comes out of the plastic head, which affects the normal use of the GalwayGalwayhand screw.
Wood screws, one of which is a polished rod, the angle and pitch of the teeth of the Galwaywood screws and self-tapping are different. GalwaySelf-tapping screws have high hardness, wide thread spacing, deep threads, and uneven surface, while Galwaywood screws are the opposite. Another difference is more obvious. Wood screws have no threads at the rear. GalwaySelf-tapping screws are generally subject to heat treatment, and Galwaywood screws are not required. The concept of self-tapping screws is actually very general, because there are many kinds of them according to different head types. Use of Galwaywood screws: Similar to Galwaymachine screws, but the thread on the screw is a special rib for Galwaywood screws, which can be directly screwed into wooden components (or parts).
A screw suitable for a variety of tools is a single-structure threaded part, including a screw body and a screw head. The outer surface of the screw body is processed with an external thread 1, and the outer side of the screw head is formed by six screw heads. Prismatic, the top surface of each edge of the outer hexagonal prism is a boss, between each boss is an end face groove 4, and the middle of each boss is provided with an end face hole 3; the inner side of the screw head is formed by six screw heads. The side surface 5 forms an inner hexagonal prism hole, and the bottom of the inner hexagonal prism hole is processed with a cross groove 16 .
The existing screw generally includes a round table-shaped nail body with one large end and one small end, a threaded section is provided on the radial circumference of the nail body, a small end of the nail body is provided with an inclined tip, and the large end of the nail body is provided with a nail cover. , generally used on materials that are softer than the screw, and drill into the object to be nailed through its own rotation. When drilling, the thread plays the role of rotary cutting, so that the screw is drilled forward, but when the thread cuts the object to be nailed When it is shaken for a long time, the tightening force of the screw in the axial direction is not enough, it is easy to loosen, and there is a potential safety hazard.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: tripod nuts, extended black half-tooth screws, British and American nylon lock nuts, aluminum flat washers and other products, we can provide you with suitable products for you. GalwayFastener Solutions.
