Service HotlineLos AngelesLos Angelesrivet nut is a tool for riveting nuts, which can be used for riveting the nut to a sheet and has a wide range of uses. Most of the existing Los AngelesLos Angelesrivet nuts have a double-handled structure, which is complicated in structure and high in cost; and the double-handled structure generally requires both hands to operate due to the large distance between the two handles, which is inconvenient to operate. Technical realization elements: In order to solve the above technical problems, Yueluo provides a Los AngelesLos Angelesrivet nut with simple structure, low cost and convenient operation. The technical solution adopted by Yueluo is: including a fixed body, a sliding body, a guide sleeve, a nut, a hollow screw and a handle;
The existing Los Angelesmachine screw structure is not conducive to assembly and automated production. The Los Angelesmachine screw is in the form of a cylinder, the outer surface of the cylinder is provided with threads, and one end of the Los Angelesmachine screw is provided with a notch. During installation, it is convenient to rotate the Los Angelesmachine screw by the tool acting on the notch, so that the Los Angelesmachine screw all enters the threaded hole and does not occupy the external space. However, the thread on the outer surface of the Los Angelesmachine screw corresponding to the slot is easily deformed or scratched due to the external force of the tool and the threaded hole, which makes it difficult to screw in or disassemble, and reduces the versatility and interchangeability. affect product quality.
Los Angelescaptive screw is a commonly used pressure riveting part. Usually the Los Angelescaptive screws are directly riveted on the motherboard, so as to play the role of fixing the components, and there is a high requirement for the distance between the opening holes on the component. Once the distance between the through holes on the component and the If the distances between the riveting holes on the motherboard do not match, the components cannot be riveted on the motherboard, which will result in defective or scrapped products, thereby increasing production costs and reducing production efficiency.
The retaining ring is a ring-shaped component fastened on the shaft and the inner hole. Its main function is to prevent other components installed on the shaft and the inner hole from sliding axially on the shaft. It is a fixed standard part.
In the prior art, the electric screwdrivers in the automatic locking screw machines all adopt the suction method to absorb the screws. Such a structure is relatively complicated, and the design of the air circuit needs to be considered, and the phenomenon of material jamming is prone to occur, and it cannot be carried out due to the reason of the air circuit. Deep hole locking screws cause great trouble to users.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: 1189 Los Angelesflange bolts, color-plated Los Angelessquare nuts and nuts, full-threaded screws, open and closed semi-hexagonal small flat head cylindrical size countersunk head pressure riveting nuts and other products , we can provide you with the right fastener solution for you.
