Service HotlineThe technical solution adopted by Yueluo to solve its technical problems is: a cabinet with a hidden screw type installation structure. The cabinet includes corner fittings, frame profiles and plates. Connecting slot, the plate installation slot is U shaped, the plate installation slot on the frame profile can be set with one or two, the insertion slot is located on the inner side of the plate installation slot; the main body of the corner fitting is fixed in three directions. The plug connector, the outer side of the plug connector is provided with auxiliary plate installation grooves, and the auxiliary plate installation groove is provided with side baffles; the plug connectors on the corner fittings are correspondingly inserted into the plug connectors on the frame profile, and the cross section of the plug connector Consistent with the cross-sectional size of the corresponding insertion slot, the plate is inserted between the plate installation slots on the frame profile.
Generally, the bolts or nuts used to press workpieces or fixtures in the T-slot of the machine tool table are made into square or rectangle. Things are very inconvenient.
Wood screws, one of which is a polished rod, the angle and pitch of the teeth of the Manchesterwood screws and self-tapping are different. ManchesterSelf-tapping screws have high hardness, wide thread spacing, deep threads, and uneven surface, while Manchesterwood screws are the opposite. Another difference is more obvious. Wood screws have no threads at the rear. ManchesterSelf-tapping screws are generally subject to heat treatment, and Manchesterwood screws are not required. The concept of self-tapping screws is actually very general, because there are many kinds of them according to different head types. Use of Manchesterwood screws: Similar to Manchestermachine screws, but the thread on the screw is a special rib for Manchesterwood screws, which can be directly screwed into wooden components (or parts).
⑥ Surface Treatment Zn: White Zinc C: Color Zinc B: Blue Zinc F: Black Zinc O: Black Oxide Ni: Nickel Cu: Bronze Br: Red Copper P: Phosphating
Rivets refer to the parts that use their own deformation or interference to connect the riveted parts in riveting. As a common fixed connector, rivets are fixed by special pull rivets, which are easy to operate and have a wide range of applications.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: tooth bar studs, high temperature washers, round head positioning pins, Manchestermetal washers and other products, we can provide you with suitable fastener solutions for you Program.
