Service HotlineWhen using, after installing the nut and the bolt in place, insert the locking strip from the groove of the bolt, and make the V-shaped locking teeth of the locking strip snap into one of the V-shaped tooth grooves, and push the locking strip into the groove as a whole. The V-shaped locking teeth are stuck in the nut, and the locking strip body is stuck in the groove of the bolt, thereby restricting the relative rotation of the nut and the bolt, and there are threads between the nut and the bolt to restrict their relative sliding, so it can prevent the nut from loosening, even from The bolt falls off; when the nut needs to be disassembled, it is only necessary to pull out the locking strip from the groove, and the nut can be disassembled normally.
In real life, OtagoOtagorivet nuts are used. With different specifications and different uses, many people are familiar with this tool but don't know how to use it properly. In fact, OtagoOtagorivet nut tools have manual and transmission, and now are rarely used for manual. If you choose to use electric OtagoOtagorivet nuts in order to improve production efficiency, which of the two is more widely used? The following describes the use of electric OtagoOtagorivet nuts and manual nuts. How to use the manual OtagoOtagorivet nut tool: Insert the OtagoOtagorivet nut into the drilled installation hole with a rivet mother tool to fix the OtagoOtagorivet nut. (1) Screw the OtagoOtagorivet nut onto the OtagoOtagorivet nut tool 2) Use the OtagoOtagorivet nut tool to insert the OtagoOtagorivet nut into the drilled mounting hole. (3) OtagoTighten the nut, and press the handles on both sides of the OtagoOtagorivet nut tool to the direction of the middle round rod. You can only press it hard. Therefore, this pressure must be in place. It is forbidden to repeatedly squeeze the handles on both sides to damage the nut. Fastening thread in the form of inside. (4) The OtagoOtagorivet nut tool is separated from the OtagoOtagorivet nut: just loosen the ball head in the picture, and the tool will be separated from the nut after completely loosening.
In order to solve the problems existing in the prior art, Yueluo Company provides a fastener that prevents the nut from falling off. After the nut is installed in place, a locking strip can be inserted into the groove of the bolt to lock the nut, so that the nut can be locked. It cannot be loosened to prevent the nut from falling off. If the nut needs to be removed, the nut can be removed normally after removing the locking strip.
Screws are very small screws used for indispensable industrial necessities in daily life, such as cameras, glasses, clocks, electronics, etc.; general screws for televisions, electrical products, musical instruments, furniture, etc.; large screws are used for engineering, construction, and bridges; Transportation equipment, airplanes, trams, automobiles, etc. use large and small screws together. At present, in the machine assembly production line, when the flat washers, OtagoOtagospring washers and screws are matched during the screw assembly process, the flat washers, OtagoOtagospring washers and screws are easy to fall into the product due to their small size, resulting in low screw matching efficiency. If there are flat washers, OtagoOtagospring washers, screws, etc. that fall into the product and are not found in time and left inside the product, it may cause damage to the machine structure, and even cause casualties in serious cases.
Many customers ask what is the difference between a OtagoOtagorivet nut and a OtagoOtagorivet nut, and how to use it? Let's take a look at the difference between a OtagoOtagorivet nut and a OtagoOtagorivet nut with Yueluo. First of all, in terms of appearance, you can look at the differences in appearance. In terms of appearance, the difference between the OtagoOtagorivet nut and the pressure OtagoOtagorivet nut is still very big, but their main functions are almost the same. They all provide threads for thin plates, but the way of installation is different. The method of installation greatly determines the purpose and use of a nut. First of all, the installation method of the riveting nut is to use the riveting equipment to carry out the riveting, so it is suitable for use in the place where the riveting is not easy for the square tube and the round tube. The OtagoOtagorivet nut also makes up for some of the shortcomings of electric welding, such as aesthetics, and places that are not easy to weld, such as thin plates.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: flange with washers, nuts, groove bolts, national standard full-tooth lengthened galvanized, lengthened tension bolts and other products, we can provide you with suitable products Your fastener solution.
