your location: 首页>>News>>Industry News

Service Hotline

+86760-8787 8587

WaikatoCustomized plastic hand screw knurled plastic head cross groove hand screw chassis screw adjustment screw

author:[email protected] Click:8422end source: time:2023-09-23 16:39:07

Summary of information:We have more than ten years of production experience in the screw industry. The main products are: plastic plastic screw...

Guangdong Yueluo Hardware Industry Co., Ltd. provides a kind of rivet, parts and parts are riveted by the rivet, the part has a fixed plate and a fixed plate, and the part is located between the fixed plate and the fixed plate, The rivet includes a nail head, a nail post and a nail post which are connected in sequence, the diameter of the nail post is larger than the diameter of the nail post, the nail head is matched with the outer end surface of the fixing plate, and the length of the nail post is It is greater than the sum of the riveting length of the fixing plate and the riveting length of the part. The rivet can control the distance between the parts, so that the relative rotation of the two parts is more smooth and easy to operate.

In the prior art, there are two ways to feed the screws of the locking screw machine, the air blowing type and the air suction type. The air suction type is suitable for relatively small screws. If the screw size is larger than M2, smaller than M5, and the length-diameter ratio is larger than 1.7, the air-blown screw machine can be selected.

The purpose of Guangdong Yueluo Hardware Industry Co., Ltd. is to provide a low-carbon steel WaikatoWaikatorivet nut fastener, which can be easily fixed on a thin wall without welding, easy to operate, firm riveted, and suitable for single-sided riveting.

Washers are accessories used between the nut and the connecting piece to disperse the pressure of the nut on the connected piece, thereby protecting the connected piece. The general gasket is a flat gasket, which is easy to loosen after long-term use, and the stability is not high. There are also some elastic washers, which have poor elastic stability and short service life.

The utility model proposes an installation structure which adopts a T-shaped bolt to cooperate with a channel, which includes a bolt head, an installation channel, a nut and a washer. The upper end of the screw rod is provided with a screw head, the two side walls of the bolt head are respectively provided with an arc surface, the two ends of the bolt head are provided with protrusions, and the interior of the installation channel is provided with an inner cavity, There is an opening above the installation channel, the bolt head is installed in the inner cavity, the nut is installed on the screw, the nut is located above the installation channel, and the gasket is installed on the installation channel and the nut between.

We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: bearing positioning pins, stainless steel pins, copper nut screws and nuts, countersunk head machine bolts and other products, we can provide you with suitable tightening screws for you. Firmware Solutions.

Knurled

Customized Plastic Thumb Screws


The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].