Service HotlineHowever, this process scheme has high cost, low efficiency, and has certain difficulties in quality assurance. In order to ensure product production efficiency, reduce manufacturing costs and improve product quality, it must be considered that the blank forming is completed on a multi-station cold heading machine at one time.
The electroplating of cross recessed screws generally refers to the electroplating of iron cross recessed screws. Stainless steel cross recessed screws are rarely electroplated. The electroplating colors of cross recessed screws are divided into environmental protection and non-environmental protection. Environmental protection blue zinc, environmental protection color zinc, environmental protection black zinc, environmental protection white nickel, etc., non-environmental protection includes white nickel, white zinc, color zinc, black zinc, black nickel, black cladding, blue zinc.
The positioning pin is a pin designed to accurately position the two adjacent parts of the mold in a mold composed of two or more parts. It can be seen that the positioning pin plays a positioning role, and the mold must be accurately synchronized when it is closed. product, and the positioning pin can make the upper and lower molds play a role in accurate positioning. In the mold design and manufacture of Yueluo, the positioning pin is one of the most common parts. Since it is only used for positioning between parts, few people will pay too much attention to it. In the cold stamping process of Yueluo, the dimensional accuracy of the blanking parts depends on the size of the working part of the punch and the concave die, and the dimensional difference between them constitutes the blanking die gap. Gap is an important process parameter for die design, and its size has a great influence on the quality of the section of the blanking part, the blanking force, and the life of the die. If the gap is too large, punching burrs will appear in punching; if the gap is too small, secondary cracks will occur in the section and extrusion burrs will appear, which will make the quality of the section after punching unsatisfactory, and a reasonable gap will not only help the punching section. The improvement of quality also contributes to the improvement of the lifespan of the three-tool.
WhistlerStainless steel screws do not necessarily corrode and rust, but that WhistlerWhistlerstainless steel screws have a stronger ability to withstand corrosion and rust than iron screws. But WhistlerWhistlerstainless steel screws can still rust under certain circumstances. So under what conditions are WhistlerWhistlerstainless steel screws prone to rust! What is the cause of rust? WhistlerStainless steel screws have better characteristics, strong corrosion resistance, high temperature resistance, and strong rust resistance. But it will rust in harsh environments. For example, WhistlerWhistlerstainless steel screws are exposed to the sun and the wind every day under very humid conditions. Over time, it will definitely rust a little. For example, in contact with some acid-base chemicals to cause chemical reactions. cause corrosion and rust. There are also bad WhistlerWhistlerstainless steel screws, such as stainless steel SUS201 screws used in seawater. Due to long-term immersion, SUS201 WhistlerWhistlerstainless steel screws themselves are not suitable for use in salty seawater. cause corrosion and rust. For the use of marine products, it is generally recommended to use stainless steel SUS316 screws, because 316 WhistlerWhistlerstainless steel screws have better performance such as corrosion resistance. From the above, it can be concluded that WhistlerWhistlerstainless steel screws will still corrode and rust under certain circumstances. Therefore, this requires the rational use of WhistlerWhistlerstainless steel screws. Use WhistlerWhistlerstainless steel screws of different materials in different situations. And in different occasions, when using WhistlerWhistlerstainless steel screws, special attention is also required, and some details need to be considered more. Try to control the corrosion and rust of WhistlerWhistlerstainless steel screws as much as possible.
The pin body of the cylindrical pin is generally provided with one or two fixing holes for inserting the split pin to realize the positioning of the pin body. The fixing hole is drilled by a drilling machine, because the drill bit is easy to slip when drilling on the cylinder, and it needs to be processed by tooling. When machining the fixed holes on the cylindrical pins, because the cylindrical pins have many specifications and different thicknesses, even the positions of the holes required to be machined on the same cylindrical pin body are not the same, resulting in various drilling tooling for the pin body, resulting in processing costs. High, on-site management is difficult.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: iron solid rivets, anti-theft screws and nuts, WhistlerGB97 stainless steel washers, hexagon socket flat cup nuts and other products, we can provide you with suitable products for you. WhistlerFastener Solutions.
