Service HotlineStandards are norms, and each country and sector has its own standards. The most commonly used standards in our daily business are as follows: GB—China National Standard (National Standard) ANSI—American National Standard (American Standard) DIN—German National Standard (German Standard) ASME—American Society of Mechanical Engineers Standard JIS - Japanese National Standard (Japanese Standard) BSW - British National Standard GB - National Standard is one of many standards in my country, as well as industry standards, professional standards and department standards. National standards are divided into: GB (mandatory standards) and GB/T (recommended standards) and GBn (national internal standards) and so on. We usually see GB30, GB5783, etc. are mandatory standards. In addition to some basic dimensions such as head-to-side, head thickness, etc., the above standards are mainly different in the threaded part. The threads of GB, DIN, JIS, etc. are all in MM (millimeters), which are collectively referred to as metric threads. Another thread like ANSI, ASME, etc. is called American standard thread in inches. In addition to metric threads and American threads, there is also a BSW-imperial standard, whose threads are also in inches, commonly known as Wyeth threads.
Process equipment for aircraft production (hereinafter referred to as tooling) is directly used for part forming and component assembly. In order to satisfy the loading and unloading of aircraft parts and components during the use of the tooling, the tooling generally adopts a structural form that is easy to disassemble as a whole. In the field of aircraft process equipment manufacturing, positioning pins are usually used to connect and position the detachable parts of the tooling. At present, this kind of locating pin is divided into two types: direct pull-out locating pin and tie-suspended locating pin.
At present, injection molding screws are widely used in various electronic and automotive components, including a body, the middle of which is provided with a through hole 3, the body head 1 has a hexagonal cross-section, and the tail 2 is provided with screw teeth. When in use, the middle through hole 3 of the main body will first put the wire harness, and then fix it by injection molding from the head I, and the threads of the tail 13 should be connected and installed with other components. Because the head I of the main body is hexagonal, the torque provided after injection molding is insufficient. Therefore, after the external thread is installed and connected with other components, the head is prone to slip, the installation is not reliable, and there is no push-pull force, resulting in product failure and increased safety hazards.
The main technical problem solved by Guangdong Yueluo Hardware Industry Co., Ltd. is to provide a fixing screw for installation, so as to provide a PCB fixing method with convenient operation, reliable connection and low production cost. In order to solve the above-mentioned technical problems, a technical solution adopted by Guangdong Yueluo Hardware Industry Co., Ltd. is to provide a fixing screw for installation, which includes a screw body, the axial surface of the screw body is formed with extended screw teeth, and the screw body is The bottom has a hemispherical screw tail, the top of the screw body is provided with a screw head, and the upper surface of the screw head is provided with a slot. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the screw body is composed of an upper tapered rod and a lower cylindrical screw rod, and the tapered rod is an inverted cone. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the diameter of the circular upper surface of the inverted cone of the taper rod is equal to the diameter of the screw mounting hole. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the screw further has a washer, the washer is arranged between the screw head and the screw body, and the washer is a cylinder. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the lower surface of the cylindrical washer has a plurality of teeth, and the teeth are along the edge of the connection between the upper surface of the inverted cone of the tapered rod and the washer Ribs formed by extending outwards. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the teeth of the washer are in contact with and pressed against the PCB board. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the protruding strip is an arc-shaped or straight-shaped structure. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the notch opened on the upper surface of the screw head is a slot. [0018] According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the notch provided on the upper surface of the screw head is a cross groove. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the fixing screw is integrally formed with conductive material. Compared with the existing technology, the fixing screws for installation designed by Guangdong Yueluo Hardware Industry Co., Ltd. can not only ensure the accuracy of the PCB installation position, but also can be installed easily and reliably, which greatly reduces the manufacturing cost and waste of metal materials.
Heat treatment technology has a crucial impact on high-strength fasteners, especially its intrinsic quality. Therefore, in order to produce high-quality high-strength fasteners, advanced heat treatment technology and equipment must be available. 1. Status of heat treatment of high-strength fasteners High-strength fasteners have 4 performance levels, namely 8.8, 9.8, 10.9, and 12.9. These four grades of high-strength fasteners must be quenched and tempered. The purpose of heat treatment and tempering is to improve the comprehensive mechanical properties of fasteners to meet the specified tensile strength value and yield ratio of the product. Therefore, the quenching and tempering process has strict requirements on raw materials, furnace temperature control, furnace atmosphere control, quenching medium, heat treatment quality inspection and control, etc.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: solid small rivets, round head extended nuts, square flat washers, extended and thickened nuts and other products, we can provide you with suitable fasteners for you solution.
