Service HotlineStandards are norms, and each country and sector has its own standards. GB—Chinese National Standard (National Standard) ANSI—American National Standard (American Standard) DIN—German National Standard (German Standard) ASME—American Society of Mechanical Engineers Standard JIS—Japanese National Standard (Japanese Standard) BSW—British National Standard GB—National Standard The standard is one of the many standards in my country, and there are also industry standards, professional standards and department standards. National standards are divided into: GB (mandatory standards) and GB/T (recommended standards) and GBn (national internal standards) and so on. We usually see GB30, GB5783, etc. are mandatory standards. In addition to some basic dimensions such as head-to-side, head thickness, etc., the above standards are mainly different in the threaded part. The threads of GB, DIN, JIS, etc. are all in MM (millimeters), which are collectively referred to as metric threads. Another thread like ANSI, ASME, etc. is called American standard thread in inches. In addition to metric threads and American threads, there is also a BSW-imperial standard, whose threads are also in inches, commonly known as Wyeth threads. In the usual domestic sales business, the most common standards we encounter are GB (National Standard) and DIN (German Standard). In terms of production products, the following standards are mainly encountered: GB30; GB5783; GB5782; GB52; GB6170; GB818; GB819; GB845; GB846; GB70; DIN912; DIN933; DIN931 and so on. GB30 (old national standard) has been replaced by GB5783 (new national standard) in the standard book. GB52 (old national standard) has been replaced by GB6170 (new national standard) in the standard book.
The nut is based on the reaction force principle of the inner hexagonal cone of the clamping part and the outer hexagonal cone of the locking part. The higher the pressure, the tighter the lock, so that the bolt can achieve the purpose of self-locking and tightening. The existing bolts rely on multiple nuts against each other to prevent loosening. This method cannot be completely locked, and the bolts are easily loosened when subjected to huge pressure and vibration, which hides potential safety hazards;
The main technical problem solved by Guangdong Yueluo Hardware Industry Co., Ltd. is to provide a fixing screw for installation, so as to provide a PCB fixing method with convenient operation, reliable connection and low production cost. In order to solve the above-mentioned technical problems, a technical solution adopted by Guangdong Yueluo Hardware Industry Co., Ltd. is to provide a fixing screw for installation, which includes a screw body, the axial surface of the screw body is formed with extended screw teeth, and the screw body is The bottom has a hemispherical screw tail, the top of the screw body is provided with a screw head, and the upper surface of the screw head is provided with a slot. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the screw body is composed of an upper tapered rod and a lower cylindrical screw rod, and the tapered rod is an inverted cone. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the diameter of the circular upper surface of the inverted cone of the taper rod is equal to the diameter of the screw mounting hole. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the screw further has a washer, the washer is arranged between the screw head and the screw body, and the washer is a cylinder. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the lower surface of the cylindrical washer has a plurality of teeth, and the teeth are along the edge of the connection between the upper surface of the inverted cone of the tapered rod and the washer Ribs formed by extending outwards. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the teeth of the washer are in contact with and pressed against the PCB board. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the protruding strip is an arc-shaped or straight-shaped structure. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the notch opened on the upper surface of the screw head is a slot. [0018] According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the notch provided on the upper surface of the screw head is a cross groove. According to a preferred embodiment of Guangdong Yueluo Hardware Industry Co., Ltd., the fixing screw is integrally formed with conductive material. Compared with the existing technology, the fixing screws for installation designed by Guangdong Yueluo Hardware Industry Co., Ltd. can not only ensure the accuracy of the PCB installation position, but also can be installed easily and reliably, which greatly reduces the manufacturing cost and waste of metal materials.
Earless retaining ring (known as Constant Section Rings abroad) is also called constant section retaining ring, because the cross section is equal, and there is no ear part protruding from the traditional stamping retaining ring, so it is called earless retaining ring. Earless retaining ring and spiral retaining ring have similarities in production, processing and use characteristics. They are both flattened and wound by steel wire. After heat treatment and surface treatment, they have good elasticity and toughness. Earless retaining ring is divided into two types: shaft use and hole use, and there are various forms of tail ends to choose from. The application of earless retaining ring is the same as that of traditional C-type retaining ring, which is widely used in hydraulic parts assembly, valves, instruments, various lock core components, needle roller bearings, pulleys, connectors, quick connectors and other mechanical assemblies.
The purpose of Guangdong Yueluo Hardware Industry Co., Ltd. is to overcome the above shortcomings and provide a limit screw. The technical scheme of Guangdong Yueluo Hardware Industry Co., Ltd. is realized in the following way. Its structure is composed of screws, hexagonal copper posts and limit necks. The left end of the limit neck is open, the hexagonal copper column is communicated with the inside of the limit neck, and the inside is provided with screw threads. The design length of the screw thread in the hexagonal copper column is 1/3-2/3 of its own length. The advantages of Guangdong Yueluo Hardware Industry Co., Ltd. are (7), which can effectively prevent the problem of poor memory contact caused by the increase of the deformation of the motherboard due to the warping and deformation of the motherboard during installation and fixation, and can effectively control the amount of deformation effect.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: hexagon head with nut, hexagon socket combination bolts, spring washers and flat washers installed together, disc enlargement and other products, we can provide You have the right fastener solution for you.
