Service HotlineThe four corners of the bolt head of the traditional T-slot connection bolt are all rounded corners, which will make the contact area between the bolt and the T-slot too small and reduce the connection fastness, especially when used for connection. When aluminum or copper profiles are used, due to the low hardness of the material, it is more likely to cause deformation of the T-shaped groove and affect the connection effect. Furthermore, since the traditional T-bolt has no direction indicator, it is difficult for the installer to identify the installation state during installation.
The flat key is a key that relies on the two sides as the working surface and transmits the torque by the extrusion of the key and the side of the keyway, and is mostly installed on the shaft. If the flat key is used for a long time or is in a bad working environment for a long time, dust, oil, etc. will inevitably be stuck between the flat key and the keyway. Since the flat key has no ejector threaded hole for disassembly, it is difficult to dismantle, and during the disassembly process A little carelessness will cause damage to the flat key.
The standard specifies hexagon head bolts with thread specifications of M3~M64, grades A and B. Grade A is used for bolts with D<=24 and L<=10D or L<=150mm (whichever is smaller); grade B is used for bolts D > 24 or L > 10 D or L > 150 (according to the smaller value) bolt size specification mark: thread specification D = M12, nominal length L = 80mm, performance level is 8.8, the table is the same as oxidation, A level Hexagon head bolt tag example bolt GB / T5782-86-M12 × 80 national standard common hex bolt head on the side size and cooperation national standard wrench thread diameter \ pair of edge sidewalls Skin wrench Wrench Double-ended open-end wrench Double-ended Torx wrench. The outer hexagon bolt is the most frequently used type of bolts. The main function of the external thread it has is to cooperate with the nut. Using this threaded connection method, the two parts are integrated. Grade C hexagon bolts are mainly used in steel structure machinery and equipment with relatively rough surface and low precision requirements. Grade A and Grade B hexagon bolts are mainly used in machinery and equipment with smooth surface and high precision requirements. Most of the stainless steel outer hexagon screws are full-tooth and hexagonal head full-tooth bolts. Standard: DIN933, GB5783, ISO4017, ANSIB18. 2.1, JISB1180; non-full thread bolt standards DIN931, GB5782, ISO4014, ANSIB18.2.1, JISB1180.
The purpose of Guangdong Yueluo Hardware Industry Co., Ltd. is a kind of anti-loosening cylindrical pin with grooves specially designed for the multi-link transmission paint mixing mixer, which is specially designed for the problems existing in the above-mentioned prior art. The purpose of Guangdong Yueluo Hardware Industry Co., Ltd. is to realize through the following technical solutions: a kind of anti-loose cylindrical pin with groove, wherein: a plurality of axial V-shaped grooves are provided on the cylindrical pin, and the V-shaped groove Arrange evenly on cylindrical pins. There are three to four axial V-shaped grooves on the cylindrical pin. When Guangdong Yueluo Hardware Industry Co., Ltd. is in use, the cylindrical pin with V-shaped groove is installed in the vertical shaft, and cooperates with the U-shaped groove on the connecting rod to transmit torque. The cylindrical pin of the V-groove structure is an interference fit with the mounting hole of the vertical shaft. The biggest feature of Guangdong Yueluo Hardware Industry Co., Ltd. compared with the existing technology is that the cylindrical pin is used as a vertical shaft to connect with the connecting rod for torque transmission, which gives full play to the impact resistance and fatigue resistance of the cylindrical pin. The cylindrical pin has an interference fit with the pin hole, and each edge of the V-groove structure distributed on the cylindrical pin body will penetrate into the inner wall of the pin hole to prevent loosening.
As the most common hardware, screws and nuts are widely used in construction and machinery fields. However, existing screws and nuts are easily corroded to varying degrees in the natural environment, especially the threads on screws and nuts are corroded After that, the whole screw and nut are useless, and people have to discard them, which will inevitably lead to a lot of waste of resources.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: brass cap nuts, washers with washers, round knurled screws, black single-way copper posts and other products, we can provide you with suitable products Your fastener solution.
