Service HotlineThe circlip is also called a retaining ring or a retaining ring. It is a kind of fastener and is installed in the shaft groove or hole groove of the machine and equipment to prevent the axial movement of the parts on the shaft or hole. The circlip includes an arc-shaped elastic bending portion and a circlip protrusion at the end of the elastic curved portion, and the circlip protrusion is provided with a small hole for matching with needle-nose pliers or circlip pliers. This part is a commonly used part on the equipment. Once the assembly is not in place, it will affect the overall performance of the equipment and cause safety hazards. At present, the most common assembly method is to manually clamp and deform the circlip with circlip pliers or needle-nose pliers, put the circlip into the annular groove of the inner hole of the end cover, and then release the needle-nose pliers or circlip pliers. . The assembly of the circlip is very troublesome, labor-intensive, and has low assembly efficiency. Once mass production is required, this process often becomes a bottleneck restricting production.
At present, the installation methods of the retaining ring: 1. Most of them are installed with retaining ring installation pliers; 2. Simple installation aids; 3. Automatic retaining ring installation machine. The disadvantages of these installation methods: 1. If the manual installation is uneven, the elastic retaining ring will deform plastically, which will cause the elastic retaining ring to fail; 2. It cannot be positioned for complex structural parts, and the production efficiency is also low; 3. Simple installation Auxiliary tools are only suitable for the parts to be installed, which are generally not universal and have limitations; 4. The automatic elastic retaining ring installation machine has a complex structure and high cost.
Advanced bolts are the foundation of high-end machinery manufacturing, and their role can be called four ounces. On the surface, the output value of bolts only accounts for a few percent of the machinery industry. In essence, the added value it brings to key components and equipment is much higher. Over the years, after the continuous double-digit growth of Chinese bolts, the bolt industry experienced negative growth in 2012, down about 1.5% year-on-year, mainly due to insufficient market demand, especially after the bolts suffered from international anti-dumping, export sales declined. situation. [1] The competition in the bolt market is fierce, and it is moving towards brand management. In the past 10 years, the development speed of China Bolt has attracted the attention of the world, which surprised the developed countries, but also made them discover a new type of big market, and multinational companies filed in. When domestic bolt companies suddenly feel that it is so difficult to survive in the market, powerful competitors have blossomed everywhere. In today's Chinese bolt market, some small and medium-sized bolt enterprises manufacture a large number of common standard parts, which does not really bring core competitiveness to the enterprise, but is subject to changes in raw materials, labor costs and other conditions. From 4.8 to 6.8 low-strength bolts, or 8.8 to 12.9 high-strength bolts, the production technology level of Chinese bolts will be basically close to the world's advanced level, mainly ordinary standard parts and low- and medium-grade special and special-shaped bolts, with large quantities Inexpensive. It can be concluded that low-grade products flood the dominant market, a small part of high-grade, high-precision, high-strength bolts still need to be imported, and the difference between the unit price of products imported and the bid price is about 6 times or more. It can be seen that China's bolt industry is still a developing industry, big but not strong, fat but not strong, and the gap with the United States, Japan, South Korea and Taiwan, my country, and lack of technical services to solve mechanical tightening. A solid solution to realize the digitalization of products, design, manufacturing and management, and the greening of products and manufacturing processes. It is understood that the development of Chinese bolts is under increasing pressure from resources and the environment. An important way to alleviate resource constraints is to develop green manufacturing. The development of bolts will continue to be actively promoted in the direction of brand management for a period of time in the future, and promote the development of bolt projects in all directions. [1] In terms of products, mid-to-high-end products will accelerate the localization of quality research and development. The whole process from design, manufacturing, packaging, transportation, use to end-of-life treatment must consider the least waste, the lowest emissions, and the high resource utilization rate. And the environmental impact is minimized, so that the corporate benefits and social benefits are coordinated and optimized. [1] In terms of circulation, explore various value-added service models to bring value and benefits to customers. From providing a single set of bolts to providing mechanical fastening solutions, customized services, remote monitoring, etc., the proportion of services in the sales revenue of bolt manufacturers will gradually increase. [1] Corporate restructuring is a trend, and strategic alliances seek development. At present, the low industrial concentration of China's bolt enterprises has seriously restricted the improvement of China's bolt competitiveness. The market opening over the years has not brought the core technology. In view of the above situation, the reorganization and strategic alliance between enterprises is a major trend. China's bolt industry must conform to this trend and trend, strengthen strategic cooperation between enterprises, and improve the overall competitiveness of China's bolts. China's growth in the field of bolt core technology lacks breakthroughs. At the same time, the living space of low-end products is getting smaller and smaller, and foreign capital through localized enterprises also has considerable cost advantages, coupled with the advantages of technology brands, and began to enter the market space of the original independent brands.
The purpose of Guangdong Yueluo Hardware Industry Co., Ltd. is to overcome the deficiencies in the existing technology and provide a square nut fastener for cable tray installation, which has a simple and reasonable structure, and is extremely convenient and flexible to operate; it does not occupy C-shaped steel after installation. The space at the bottom increases the diversity of installation, and can be applied to square nuts of different thicknesses, and the installation is firm
In order to achieve this purpose, the rivet nut is cold extruded from low carbon steel, the brim is cold forged, the deformed skirt is extruded in the die, and the threaded hole is extruded at the lower end of the deformed skirt. It is characterized in that it consists of a brim, a deformed skirt and a threaded hole. There are fish teeth below the brim; the outer side of the lower end of the threaded hole has a lead angle; the cross section of the thread on the inner wall of the threaded hole is an isosceles trapezoid, and the upper bottom of the trapezoid is a concave arc. Thus, the riveted object is tightly connected with the rivet nut.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: adjusting hand tightening screws, color galvanized nuts, hexagonal copper studs, hand tightening copper nuts and other products, we can provide you with suitable tightening screws for you. Firmware Solutions.
