Service HotlineScrew (pinyin: luógǎn, English: screw): a cylinder with a spiral groove cut on the outer surface or a cone cut with a tapered spiral groove. The screw has a different head, the head is called an external hexagon screw. There are others, such as large flat screws, socket head screws and so on.
At present, the automatic nailing device on the domestic market lacks the restraint and arrangement of the rivets when they are out of the nailing device, which makes the rivets irregular and uncontrollable after the automatic nailing is completed, which has adverse effects on on-site use and maintenance, and is unstable. .
The above riveting requires special tools and equipment, which cannot be used in actual specific occasions. In the case of no electricity and no air, only manual tools can be used; and manual tools cannot be used for large types of rivets due to limited human strength. Moreover, after the rivet is disassembled, the rivet itself will be destroyed and cannot be reused.
The material of the rubber gasket is NBR nitrile rubber, which is the most commonly used and has the highest cost performance. The use of FFKM perfluoroelastomer gaskets is generally in the more advanced fields, such as the field of aerospace rockets. Because its price is quite expensive, but its performance is excellent and can exceed many metal materials. For specific material information, please refer to the following: Material Name Chemical Description English Abbreviation English Alias Nitrile Butadiene Rubber Acrylonitrile-Butadiene Rubber Ethylene-Propylene-Diene Rubber EPDM EP,EPT,EPR Neoprene Neoprene CR Neoprene Silicone Silicone Rubber WMQ PVMQ Fluorosilicone Fluorosilicone Rubber FVMQ FVMQ Acrylate Acrylate Rubber ACM ACM Ethylene Acrylate Vinyl -Acrylic Rubber AEM Vamac Styrene-Butadiene Styrene-Butadiene Rubber SBR SBR Polyurethane Polyester/Polyether Urethane AU/Eu AU/EU Natural Rubber Natural Rubber NR NR
The post-treatment of nickel-phosphorus plating includes two main processes of driving hydrogen and polishing. ①Hydrogen drive; according to the relevant standards, the hydrogen drive temperature after plating is 200±10℃, and the treatment time is 2h. 200 ℃ is beneficial to eliminate hydrogen embrittlement, relax internal stress, improve the bonding force between the coating and the substrate, and improve the corrosion resistance of the coating. ②Polishing; the polished bolt has a bright appearance, but in order to better improve the quality of the coating, smooth the tiny traces, and obtain a bright mirror-like surface, the coating needs to be polished with a polishing machine.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: single-layer knurled nuts, machine wire screws, cross bolts with washers, half-tooth cup head screws and other products, we can provide you with products suitable for you fastener solutions.
