Service HotlineA nut provided by Yueluo. The nut is in the shape of a sleeve and has a threaded section inside. An annular groove is set on the inner wall of one end of the threaded section. The notch of the groove points to the hole core. The hole diameter at the groove notch at the front end is larger than the nominal size of the thread segment or the hole diameter at the groove notch at the rear end in the screwing direction is smaller than the nominal size of the thread segment.
An anti-loosening nut structure includes a flat nut and an oblique nut. One end surface of the oblique nut is an oblique surface, and an angle is formed between the oblique surface and the vertical line of the screw hole axis of the oblique nut. Nuts are installed on the bolts one after another, and the mating contact surfaces of the two nuts include the inclined surface, which are tightened in sequence.
The technical solution adopted by Guangdong Yueluo Hardware Industry Co., Ltd. to solve its technical problems is a special pull rivet for railway freight cars, which has a pull rivet body and a collar. The rod body is composed of polished rod section, locking ring groove section and tail thread section from top to bottom. Protectors are provided at the tail thread section to prevent rust and bad teeth in the tail thread section during use. , collision deformation, etc. Specifically, the tail thread segment has an external thread or an internal thread, and the protective member is a nut or a bolt.
Advanced bolts are the foundation of high-end machinery manufacturing, and their role can be called four ounces. On the surface, the output value of bolts only accounts for a few percent of the machinery industry. In essence, the added value it brings to key components and equipment is much higher. Over the years, after the continuous double-digit growth of Chinese bolts, the bolt industry experienced negative growth in 2012, down about 1.5% year-on-year, mainly due to insufficient market demand, especially after the bolts suffered from international anti-dumping, export sales declined. situation. [1] The competition in the bolt market is fierce, and it is moving towards brand management. In the past 10 years, the development speed of China Bolt has attracted the attention of the world, which surprised the developed countries, but also made them discover a new type of big market, and multinational companies filed in. When domestic bolt companies suddenly feel that it is so difficult to survive in the market, powerful competitors have blossomed everywhere. In today's Chinese bolt market, some small and medium-sized bolt enterprises manufacture a large number of common standard parts, which does not really bring core competitiveness to the enterprise, but is subject to changes in raw materials, labor costs and other conditions. From 4.8 to 6.8 low-strength bolts, or 8.8 to 12.9 high-strength bolts, the production technology level of Chinese bolts will be basically close to the world's advanced level, mainly ordinary standard parts and low- and medium-grade special and special-shaped bolts, with large quantities Inexpensive. It can be concluded that low-grade products flood the dominant market, a small part of high-grade, high-precision, high-strength bolts still need to be imported, and the difference between the unit price of products imported and the bid price is about 6 times or more. It can be seen that China's bolt industry is still a developing industry, big but not strong, fat but not strong, and the gap with the United States, Japan, South Korea and Taiwan, my country, and lack of technical services to solve mechanical tightening. A solid solution to realize the digitalization of products, design, manufacturing and management, and the greening of products and manufacturing processes. It is understood that the development of Chinese bolts is under increasing pressure from resources and the environment. An important way to alleviate resource constraints is to develop green manufacturing. The development of bolts will continue to be actively promoted in the direction of brand management for a period of time in the future, and promote the development of bolt projects in all directions. [1] In terms of products, mid-to-high-end products will accelerate the localization of quality research and development. The whole process from design, manufacturing, packaging, transportation, use to end-of-life treatment must consider the least waste, the lowest emissions, and the high resource utilization rate. And the environmental impact is minimized, so that the corporate benefits and social benefits are coordinated and optimized. [1] In terms of circulation, explore various value-added service models to bring value and benefits to customers. From providing a single set of bolts to providing mechanical fastening solutions, customized services, remote monitoring, etc., the proportion of services in the sales revenue of bolt manufacturers will gradually increase. [1] Corporate restructuring is a trend, and strategic alliances seek development. At present, the low industrial concentration of China's bolt enterprises has seriously restricted the improvement of China's bolt competitiveness. The market opening over the years has not brought the core technology. In view of the above situation, the reorganization and strategic alliance between enterprises is a major trend. China's bolt industry must conform to this trend and trend, strengthen strategic cooperation between enterprises, and improve the overall competitiveness of China's bolts. China's growth in the field of bolt core technology lacks breakthroughs. At the same time, the living space of low-end products is getting smaller and smaller, and foreign capital through localized enterprises also has considerable cost advantages, coupled with the advantages of technology brands, and began to enter the market space of the original independent brands.
With the vigorous development of the construction market, fastener-type steel pipe scaffolding and formwork support have been widely used, and a large number of fasteners are used in the fastener-type steel pipe scaffolding and formwork support system. The commonly used fastener structure generally includes a fastener body 1, a blade 2, and a rivet 3 for connecting the fastener body and the blade. An arc-shaped cavity 4 for penetrating the steel pipe is provided between the fastener body and the blade. Figure 1 Right-angle fasteners shown. However, in the process of building construction, the blades of the fasteners have different degrees of cracks and fractures, which lead to the scrapping of the fasteners, or the fasteners are scrapped due to the poor anchoring of the rivets of the fasteners, resulting in a lot of waste, and the fasteners are damaged. There is a large safety construction hazard. However, repairing damaged fasteners entirely by hand has many disadvantages, such as technical difficulty, time-consuming and labor-intensive, and high operating costs. Therefore, researching and designing an auxiliary device for installing rivets in the process of repairing damaged fasteners to reduce labor intensity of workers, improve repair efficiency, and reduce operating costs is a technical problem to be solved urgently by those skilled in the art.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: tapping pins, full-tooth extension bolts, color zinc round head screws, hand-tightening adjustable set bolts and other products, we can provide you with The right fastener solution for you.
