Service HotlineMost of the existing belts control the length of the belt by fixing the other end of the belt by the buckle, and the period that is often buckled by the buckle will be deformed and damaged after long-term use, and the user may change the position from standing to sitting or after meals. The circumference of the belt can be adjusted, and micro-adjustment is not necessarily possible when adjusting the tightness of the pin buckle type or buckle plate type belt buckle. In order to solve this problem, it is necessary to design a belt that is relatively suitable for the waist of a person.
nut is a nut, a part that is screwed together with a bolt or screw for fastening. A component that must be used in all production and manufacturing machinery is divided into carbon steel, stainless steel, non-ferrous metals (such as copper), etc. several types. Chinese name nut Foreign name Crewnut alias Nut properties and bolts or screws screw together to tighten the role of carbon steel, stainless steel, non-ferrous metal standard GB German standard international standard Japanese standard American standard features Steel, stainless steel, copper, alloy, etc.
The global economy continues to slump and overseas export trade is sluggish. Many fastener companies at home and abroad are facing severe tests. Accelerating economic transformation and structural upgrading is imminent, and developing overseas markets is undoubtedly an important way out for the development of the current fastener industry. From the fourth quarter of 2011 to the first half of 2012, affected by the objective environment, the development speed of the fastener industry may slow down, but from the third quarter of 2012, with the policy in place, the convening of the 18th National Congress of The upcoming series of development policies, etc., can promote the further development of the industry. And we must insist on innovation and adjustment and transformation, we must continue to rely closely on key industries such as automobiles, new energy, aerospace, shipbuilding, urban transportation, IT, electronic appliances, construction, etc., accelerate the optimization and upgrading of fastener products, and promote fasteners. The whole industry develops healthily and steadily. The global fastener market size exceeds 50 billion US dollars, and China's total fastener production in 2012 is also expected to reach about 6.8 million tons. However, compared with the manufacturing powerhouses such as the United States and Japan, there is still a big gap in my country's fastener industry.
Procurement and sales in the testing process know that the quality of screws is manufactured, not detected, but in manufacturing, we must try our best to make them as good as possible. But it is unlikely to be completely error-free and error-free. We all know that errors are unavoidable and can only be approached infinitely. Therefore, at this time, the quality inspection of the screw is required to improve the quality of the screw. At the beginning of ordering from screw wire material into the production of screw industry manufacturers, you must first check the wire diameter of the screw wire and the material of the screw. Generally, the wire diameter of the screw is measured with a caliper to measure the size of the wire diameter, whether it is suitable for self-ordering. Same size. After testing these, it is the testing in the production process, starting from the head of the screw, to determine the size of the head, the opposite side of the head, the diagonal angle, the depth of the cross groove, the tolerance range of the screw, and so on. These are checked with calipers. In the inspection of all aspects when rolling teeth, the main thing is whether the thread can pass the pass and stop gauge, and whether the screw thread can pass the gauge and stop. Next is the electroplating measurement problem. After electroplating, whether it meets the requirements of environmental protection and whether it can pass the time required by the salt spray. Tools include environmental testing machines and salt spray testing machines. In short, in the process of screw production and sales, there must be necessary tools to detect the quality of screws. The summary should be summarized as follows: calipers, hardness testers, salt spray machines, environmental testing machines, pass and stop gauges, etc. When producing and selling screws, there will be a screw specification and screw model. With the screw specification and screw model, we can understand what specification screw and what size screw the customer needs. Many screw specifications and screw models are based on national standard specifications and models. Generally, such screws are called ordinary screws, which are generally available on the market. There are some non-standard screws, which are not based on the national standard specifications, models and sizes, but are customized according to the standards required by the product materials. There is no stock in the general market at all. In this way, it is necessary to make drawings and samples.
At present, more rivets are used on car tires. Due to the long-term bumps of the car, traditional equipment is prone to loosening during the use process, which affects safety. The above problems need to be improved on traditional equipment, so how to design a Rivets on car tires, this becomes a problem we need to solve.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: countersunk head screws, rivet standoffs, single-head motherboard isolation column nuts, hand-tightening screws and other products, we can provide you with suitable tightening screws piece solution.
