Service HotlineIn the modern industrial field, products such as nuts and bolts are widely used to lock structural parts, but at the same time we also find that in many cases, especially when applied to vibration, we often need to lock the already locked Structural parts are regularly repaired and strengthened to prevent structural dislocation caused by loose nuts and bolts.
Rivets for blind holes, including a cap head and a hole post, the cap head is fixed on one end face of the hole post, a tip is formed on the other end face of the hole post, and the end of the hole post close to the cap head is along its side circumference An annular groove is formed concave inward. After the hole column of the blind hole is placed in the blind hole position of the metal piece, the tip of the end face of the hole column is squeezed into the metal material under the end face of the hole column under the action of external force, and the metal material on the side of the hole column is also affected by the hole. The extrusion of the side of the column makes part of the metal material completely squeezed into the annular groove, so that the annular groove is filled more firmly, and at the same time, the tip is squeezed into the metal material, which can double-position the rivet. Therefore, the self-riveting of the rivet is realized. The rivet also has the advantages of simple structure, simple and fast installation, and no cracking caused by impact and other undesirable phenomena.
The anchor bolts of some metallurgical industrial equipment are detachable, that is, the anchor bolts are not directly anchored in the foundation concrete, but anchored in the T-bolt sleeve (T-bolt sleeve hereinafter referred to as sleeve) , The sleeve is constructed together with the foundation and anchored directly in the foundation. The T-bolt is inserted into the sleeve when the equipment is installed, and the T-bolt can be removed from the sleeve when the equipment is replaced.
Stainless Steel Nuts Hexagon Nuts (GB6170/DIN934), Thin Nuts (GB6172/DIN439), Heavy Nuts (Metric, US), Nylon Lock Nuts (DIN985-DIN982 Thick), All Metal Lock Nuts (DIN980M), Cap Nuts (DIN1587), Flange Nuts (GB6177/DIN6923), Flange Nuts Nylon Lock Nuts (DIN6926), Square Weld Nuts (DIN928), Hex Weld Nuts (DIN929), Butterfly Caps (GB62, DIN315, American), K cap, etc. Specifications: M1.6-M64
At present, injection molding screws are widely used in various electronic and automotive components, including a body, the middle of which is provided with a through hole 3, the body head 1 has a hexagonal cross-section, and the tail 2 is provided with screw teeth. When in use, the middle through hole 3 of the main body will first put the wire harness, and then fix it by injection molding from the head I, and the threads of the tail 11 should be connected and installed with other components. Because the head I of the main body is hexagonal, the torque provided after injection molding is insufficient. Therefore, after the external thread is installed and connected with other components, the head is prone to slip, the installation is not reliable, and there is no push-pull force, resulting in product failure and increased safety hazards.
We have many years of experience in the production and sales of screws, nuts, flat washers, etc. The main products are: flat nuts, straight-through hollow chassis motherboard computer board studs, connecting screws, single-pass copper studs and other products, we can provide you with suitable products for you Fastener Solutions.
