What is the tolerance range of precision screws?
What is the tolerance range of precision screws?
A nut provided by Yueluo. The nut is in the shape of a sleeve and has a threaded section inside. An annular groove is set on the inner wall of one end of the threaded section. The notch of the groove points to the hole core. The hole diameter at the groove notch at the front end is larger than the nominal size of the thread segment or the hole diameter at the groove notch at the rear end in the screwing direction is smaller than the nominal size of the thread segment.
Surface treatment process of screws 1. Types of surface treatment: Surface treatment is the process of forming a covering layer on the surface of the workpiece by a certain method. The purpose is to give the surface of the product a beautiful and anti-corrosion effect. The following methods are as follows: 1. Electroplating: Immerse the part to be electroplated in an aqueous solution containing the metal compound to be deposited, and pass the current through the plating solution to precipitate and deposit the electroplated metal on the part. Generally, electroplating includes galvanized, copper, nickel, chromium, copper-nickel alloy, etc., and sometimes blackening (blue), phosphating, etc. are also included. 2. Hot-dip galvanizing: It is done by immersing the carbon steel parts in a zinc-melting bath with a temperature of about 510°C. The result is that the iron-zinc alloy on the surface of the steel gradually becomes passive zinc on the outer surface of the product. Hot dip aluminizing is a similar process. 3. Mechanical plating: The surface of the product is impacted by the particles of the plated metal, and the coating is cold welded to the surface of the product.
Advanced bolts are the foundation of high-end machinery manufacturing, and their role can be called four ounces. On the surface, the output value of bolts only accounts for a few percent of the machinery industry. In essence, the added value it brings to key components and equipment is much higher. Over the years, after the continuous double-digit growth of Chinese bolts, the bolt industry experienced negative growth in 2012, down about 1.5% year-on-year, mainly due to insufficient market demand, especially after the bolts suffered from international anti-dumping, export sales declined. situation. [1] The competition in the bolt market is fierce, and it is moving towards brand management. In the past 10 years, the development speed of China Bolt has attracted the attention of the world, which surprised the developed countries, but also made them discover a new type of big market, and multinational companies filed in. When domestic bolt companies suddenly feel that it is so difficult to survive in the market, powerful competitors have blossomed everywhere. In today's Chinese bolt market, some small and medium-sized bolt enterprises manufacture a large number of common standard parts, which does not really bring core competitiveness to the enterprise, but is subject to changes in raw materials, labor costs and other conditions. From 4.8 to 6.8 low-strength bolts, or 8.8 to 12.9 high-strength bolts, the production technology level of Chinese bolts will be basically close to the world's advanced level, mainly ordinary standard parts and low- and medium-grade special and special-shaped bolts, with large quantities Inexpensive. It can be concluded that low-grade products flood the dominant market, a small part of high-grade, high-precision, high-strength bolts still need to be imported, and the difference between the unit price of products imported and the bid price is about 6 times or more. It can be seen that China's bolt industry is still a developing industry, big but not strong, fat but not strong, and the gap with the United States, Japan, South Korea and Taiwan, my country, and lack of technical services to solve mechanical tightening. A solid solution to realize the digitalization of products, design, manufacturing and management, and the greening of products and manufacturing processes. It is understood that the development of Chinese bolts is under increasing pressure from resources and the environment. An important way to alleviate resource constraints is to develop green manufacturing. The development of bolts will continue to be actively promoted in the direction of brand management for a period of time in the future, and promote the development of bolt projects in all directions. [1] In terms of products, mid-to-high-end products will accelerate the localization of quality research and development. The whole process from design, manufacturing, packaging, transportation, use to end-of-life treatment must consider the least waste, the lowest emissions, and the high resource utilization rate. And the environmental impact is minimized, so that the corporate benefits and social benefits are coordinated and optimized. [1] In terms of circulation, explore various value-added service models to bring value and benefits to customers. From providing a single set of bolts to providing mechanical fastening solutions, customized services, remote monitoring, etc., the proportion of services in the sales revenue of bolt manufacturers will gradually increase. [1] Corporate restructuring is a trend, and strategic alliances seek development. At present, the low industrial concentration of China's bolt enterprises has seriously restricted the improvement of China's bolt competitiveness. The market opening over the years has not brought the core technology. In view of the above situation, the reorganization and strategic alliance between enterprises is a major trend. China's bolt industry must conform to this trend and trend, strengthen strategic cooperation between enterprises, and improve the overall competitiveness of China's bolts. China's growth in the field of bolt core technology lacks breakthroughs. At the same time, the living space of low-end products is getting smaller and smaller, and foreign capital through localized enterprises also has considerable cost advantages, coupled with the advantages of technology brands, and began to enter the market space of the original independent brands.
Traditionally, the pressure rivets on the product are all beaten by hand by workers, resulting in high scrap rate and low efficiency, and this rivet is not a traditional rivet, so it is difficult to locate and requires high pressure. The rivets are thin, and the pressure is too large to cause deformation of the rivets. If the pressure is too small, it cannot be riveted. Without special positioning and tooling, it cannot be riveted on the riveting machine. The quality of the products produced in this way is difficult to guarantee, and the quality levels of the products in the same batch are uneven. Affect delivery time.
The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].
