What is the tolerance range of precision screws?
What is the tolerance range of precision screws?
Hydraulic wrench or pulling method Use hydraulic torque wrench or puller to fasten large screws, which saves effort and has high precision. However, hydraulic tools are expensive, screws of different sizes need to be equipped with different wrenches, and now the hydraulic pullers in the world are generally only M160×6. If the screws are too large, special specifications or very few in number, it is extremely uneconomical to equip them with hydraulic tightening tools.
The embedded nut proposed by Guangdong Yueluo Hardware Industry Co., Ltd. is used to be embedded in an injection molded part. The embedded nut is arranged in a column shape and has a screw hole inside. The embedded nut includes an outer peripheral surface and is formed in the inner nut. The upper end surface and the lower end surface of the two ends of the embedded nut are provided with knurling on the outer peripheral surface, and a guide surface is formed at the connection between the outer peripheral surface and the lower end surface.
Bolts are widely used as common fasteners. The traditional T-bolt consists of a head, a screw and a tail. The head is a long plane. During the use of the T-bolt of this structure, the T-bolt and the groove The contact surface of the track is a smooth surface, its friction force is not large, its connection is not firm enough, and it is easy to fall off. For this reason, some people design the head as a bevel to increase friction, but only one bevel is in contact with the part in this design, and the sealing is not very good
The technical solution adopted by Guangdong Yueluo Hardware Industry Co., Ltd. to solve its technical problems is: a waterproof rivet, including an integrally formed waterproof cap and a rivet rod for waterproofing, and the waterproof cap includes a lower part that is fixedly connected with the rivet rod. An end face, the lower end face includes a fixing portion arranged in order from the center position of the lower end face to the outside, a buffer portion arranged circumferentially with the fixing portion as the center, and a waterproof portion arranged circumferentially with the fixing portion as the center, the fixing portion and the rivet The rods are fixedly connected, and the section of the waterproof part is a figure-eight shape.
The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].
