What is the tolerance range of precision screws?
What is the tolerance range of precision screws?
Guangdong Yueluo Hardware Industry Co., Ltd. provides a shaft retaining ring in order to solve the above problems. The plan of Guangdong Yueluo Hardware Industry Co., Ltd. is a shaft retaining ring realized in this way, which is composed of a shaft washer, a torsion spring, a positioning pin and a limit pin. It is characterized in that the shaft washer is provided with two symmetrical distribution gaps. a circular ring, and a groove is provided at the vertical notch on one side, and a stepped through hole is provided on the side notch facet of the groove to cooperate with the limit pin, and the two sides of the groove are provided with a through hole and a locating pin Matching; the limit pin is a stepped short shaft. The beneficial effects of Guangdong Yueluo Hardware Industry Co., Ltd. are simple structure, low production cost, convenient and reliable use.
M4 grounding screw used to fix the grounding wire on household appliances and other equipment, the stud is cylindrical, and the thread is perpendicular to the end (section) surface. However, the screw holes on the equipment all have tapping guide grooves for sinking and guiding due to the manufacturing process requirements. When fixing the ground wire, if the screw is not positioned accurately (the screw is inclined), the screw is pressed down hard, which is easy to cause the screw and the screw. The screw hole bites the teeth, and after biting the teeth, it is easy to cause the screw to loosen or fall off, posing a safety hazard.
In order to achieve the above purpose, the technical scheme adopted by the screw in Yueluo Company is as follows.
Rivets for blind holes, including a cap head and a hole post, the cap head is fixed on one end face of the hole post, a tip is formed on the other end face of the hole post, and the end of the hole post close to the cap head is along its side circumference An annular groove is formed concave inward. After the hole column of the blind hole is placed in the blind hole position of the metal piece, the tip of the end face of the hole column is squeezed into the metal material under the end face of the hole column under the action of external force, and the metal material on the side of the hole column is also affected by the hole. The extrusion of the side of the column makes part of the metal material completely squeezed into the annular groove, so that the annular groove is filled more firmly, and at the same time, the tip is squeezed into the metal material, which can double-position the rivet. Therefore, the self-riveting of the rivet is realized. The rivet also has the advantages of simple structure, simple and fast installation, and no cracking caused by impact and other undesirable phenomena.
The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].
