What is the tolerance range of precision screws?
What is the tolerance range of precision screws?
rivet is a nail-shaped object with a cap on one end: in riveting, the riveted parts are connected by their own deformation or interference. There are many types of rivets, and they are informal. Commonly used are semi-circular head, flat head, semi-hollow rivet, solid rivet, countersunk head rivet, blind rivet, hollow rivet, which usually use their own deformation to connect the riveted parts. Generally, cold riveting is used for those smaller than 8 mm, and hot riveting is used for larger ones. But there are exceptions, such as the nameplate on the three-ring lock, which is riveted by the interference between the rivet and the lock body hole. In addition, there are paired rivets, which are special. Divided into two parts, the thicker section of the rod with a cap has a hole in the center, and the other section of the rod with a cap is an interference fit. When riveting, drive the thin rod into the thick rod. Most of the existing rivets are connected by overall deformation to achieve mutual cooperation. In the ultra-fine-pitch display screen, the rivets used to fix the ultra-fine-pitch display screen have a slender diameter. If they are fixed by overall deformation, they are prone to bending and breaking. and other phenomena, the tightening effect is not good or there is no tightening effect, which damages the components, increases the cost, and wastes time and resources.
Nuts cooperate with screws to achieve the fixing and connection of components. SMD nuts are generally used in the circuit board industry to fix electronic components. That is, the chip nut is soldered on the circuit board by solder, and the electronic components are fixed by turning the screw. However, when the current chip nut is soldered on the circuit board, there may be uneven soldering, which makes the soldering untidy. At the same time, during soldering, the excess solder overflows from the periphery of the nut, which affects the appearance and may affect its appearance. electrical properties. In addition, the nut is only welded with the circuit board on one end face, and its firmness and reliability after welding are low.
Yueluo - a screw and nut disassembly tool for a narrow space, including a sleeve rod, a sleeve rod vertically arranged at one end of the sleeve rod, a connecting rod for fixedly connecting the sleeve rod and the sleeve rod, and a sleeve rod located at the end of the sleeve rod. The connecting rod in the axial through hole of the sleeve rod, the connecting rod located in the axial through hole of the sleeve rod, and the bearing for fixedly connecting the sleeve rod and the connecting rod and making the connecting rod rotate stably in the sleeve rod , and a sleeve head arranged at one end of the connecting rod, the connecting rod and the adjacent end of the connecting rod are provided with gears and the two gears are vertically meshed, so that when the external force drives the connecting rod to rotate, the force passes through The two gears and the connecting rod are transmitted to the sleeve head, thereby driving the screw or nut in the sleeve head to rotate;
Nuts are very common fasteners. Generally, the torque cannot be limited when the nut is twisted. The degree of tightness of the nut is mostly judged by the worker's experience. In this way, when the nut is over-tightened, it will lead to the destruction of the thread pair, thereby shortening the fastener. The life of the nut may even cause the bolts to be pulled off in severe cases; and the nut is too loosely screwed, which will lead to the problem of insecure fixing.
The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].
