What is the tolerance range of precision screws?
What is the tolerance range of precision screws?
In order to meet the needs of different assembled installation components, there are also hand-tightening methods for tightening the screws, but in actual use, ordinary manual screws can easily cause hand pain to the user, and the operation is extremely inconvenient; at the same time, due to tightening The contact area between the screw and the installation component is too small. If the user exerts too much force, the uneven force per unit area of the installation component will cause deformation and depression, which will affect the use. Therefore, a manual screw is proposed to solve the above problems.
The retaining ring is a ring-shaped body with an opening, and the traditional processing method is stamping. That is, a plate-shaped material is selected and punched out on the plate-shaped material (a circular body, and then the middle of the circular body is punched to form a ring-shaped ring body.) The punched material in the middle cannot be used again. This results in a waste of material.
Blind rivets are a type of rivets for single-sided riveting, but they must be riveted with a special tool - a rivet gun (manual, electric, and moving). This type of rivet is especially suitable for riveting occasions where it is inconvenient to use ordinary rivets (which must be riveted from both sides), so it is widely used in construction, automobiles, ships, aircraft, machinery, electrical appliances, furniture and other products. Among them, the open type oblate head blind rivets are the most widely used, the countersunk head blind rivets are suitable for riveting occasions that require smooth performance, and the closed blind rivets are suitable for riveting occasions that require higher load and certain sealing performance.
Guangdong Yueluo Hardware Industry Co., Ltd. discloses a through-hole mounting nut, which includes a hexagonal portion and a cylindrical portion, a threaded hole is arranged between the hexagonal portion and the cylindrical portion, and the cylindrical portion is provided with a threaded hole. Two grooves, each of the two sides of the groove has a convex side, and the upper surface of the side is provided with a convex point; the advantage is that the two sides are squeezed by the bolt, Or after the hammer is struck, it will bend to both sides, and it can be fastened to both sides of the screw hole of the sheet metal without welding.
The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].
