What is the tolerance range of precision screws?
What is the tolerance range of precision screws?
The core rivet is another type of single-sided riveting. When riveting, the head of the rivet is hit with a hammer to expose the core, so that it is flush with the end face of the nail head, that is, the riveting operation is completed, which is very convenient, especially suitable for inconvenient Riveting occasions using ordinary rivets (which must be riveted from both sides) or blind rivets (lack of a rivet gun). Usually use flat head rivets, countersunk head rivets are suitable for occasions where smooth riveting is required on the surface.
The most important link in the development and design of fasteners is quality control. There are several major points from the feed to the finished product shipment, and these major points have different inspection methods. First of all, the feed is related to appearance, size, elements, performance, detection of harmful substances, etc.; the process is more about appearance, size, percussion test, forging flow line; heat treatment is more about appearance, hardness, torque, tension , metallography, etc.; the surface treatment is more about some hydrogen embrittlement tests, coatings, salt spray, etc., including a detection of harmful substances in shipments. In size and appearance inspection, the common ones are quadratic element, contour measuring instrument, three-coordinate measuring instrument, image sorting machine (this is a full selection machine); in mechanical and chemical inspection, there are mainly hardness machines (Rockwell and Vickers). ), tensile machine, metallographic microscope; in material testing, there is a spectrum analyzer and a salt spray testing machine.
The DISC-LOCK lock nut is composed of two parts, each part has staggered cams. Due to the internal wedge design, the slope angle is greater than the nut angle of the bolt, the combination will be tightly bite into a whole, when vibration occurs. When the DISC-LOCK lock nut is staggered, the raised parts of the DISC-LOCK lock nut move with each other to generate lifting tension, so as to achieve a perfect anti-loosening effect.
According to the properties of nuts, there are mainly national standard (GB), German standard (DIN), international standard (ISO), Japanese standard (JIS), American standard (ASTM/ANSI) and other standards. Among them, the national standard, German standard, and Japanese standard are represented by M (such as M8, M16), and the American system and the British system are represented by fractions or # (such as 8#, 10#, 1/4, 3/8). Commonly used national standard GB41 Ⅰ type hexagonal nut - C grade GB6170 Ⅰ type hexagonal nut - A, B grade GB6171 I type hexagonal nut - fine thread - A, B grade GB6172 hexagonal thin nut - A, B grade - chamfering GB6173 Hexagonal Thin Nut - Fine Thread - A, B Grade GB6174 Hexagon Thin Nut - B Grade - No Chamfer GB6175 II Hexagonal Nut - A, B Grade GB6176 II Type Hexagonal Nut - Fine Thread - A, B Grade GB6177 Hexagon Method Blue face nut - grade A GB55 hexagonal thick nut GB56 hexagonal super thick nut GB1229 large hexagonal nut (high strength for steel structure)
The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].
