What is the tolerance range of precision screws?
What is the tolerance range of precision screws?
At present, there are two commonly used nut fixing methods, one is welding fixing: high energy consumption, the welding process easily leads to thread deformation in the nut, which requires re-tapping, which increases the cost, and for aluminum alloy and other materials, the welding process is poor, It is easy to produce welding defects and cannot achieve the function of fastened connection; the other is to pull riveting: in this method, the connection force of the nut is not strong, the reliability is not good, and it is not suitable for thin-walled profiles.
Existing wood screws are composed of a threaded portion with a tapered angle and arranged along a tapered stem and a screw head. The head of the screw can be a countersunk head, hemispherical, or other shapes, and the head of the screw has a groove that fits with the tool, a word groove, and a concave cross groove. The taper angle of existing wood screws is either 45 degrees or 60 degrees, and the front end of the taper angle is a pointed point formed by a rotating thread. The existing wood screws have the following three deficiencies in use. Because the taper angle is 45 degrees or 60 degrees, and the thread angle is 64 degrees, the resistance when entering the material is relatively large, so the existing wood screws are manually screwed. It is difficult to screw in, especially when it is used for hardwood materials, and it often happens that the groove of the screw head is screwed out; A large lateral moment will be formed when the screw is screwed, which is prone to the problem of deviation from the position; in addition, because the existing screw is tapered, it will be subjected to both radial force and axial force when entering the material, and its stress state It is more complicated, so it is easy to cause the cracked wood material to burst, and even cause the material to have longitudinal cracks and be unusable.
High-strength self-locking nut for boats and bridges, it can convert the friction force into the expansion force between the bolt and the slot nut to achieve excellent self-locking effect. There are two slots on the upper part of the ESL nut. When the nut is tightened on the bolt, the thread of the bolt will be screwed into the slot of the cross section of the nut, and the thread will be gradually locked by the side wall of the nut to achieve the function of self-locking. The exquisite production process can keep the torque type of the locking element consistent, and the products are generally used in railway casting, rail transit, transmission system, mining equipment, highway, military, oil production machinery, automobile industry, public facilities, subway, engine, construction machinery , aerospace, drilling equipment, bridges, generators, agricultural machinery, shipbuilding industry, metallurgical equipment, trains, compressors, medical machinery, signal systems, wind power generation
Stainless steel screw wire is also called stainless steel cold pier wire, which is mainly used for various fasteners, such as mechanical parts, electronic application parts, etc. Corresponding anti-corrosion properties and mechanical properties can be obtained according to different materials. In order to obtain a better formability during cold forging, choose high quality. The appropriate material of the wire is particularly important.
The above content is uploaded by Yueluo or the Internet. If there is any copyright issue, please contact [email protected].
